Time for a New Approach

IN the end, the biggest root causes for injuries may be inattention and fatigue. This realization is monumental: It means behavior-based safety is truly valuable, hours of service rules are warranted for many industries (not just transportation), and safety in America will not be solved unless it is addressed holistically--with as much attention paid to off-the-job human factors as to contaminants, PPE, training, engineering controls, and other on-site elements.

These thoughts came to me as I read the U.S. Bureau of Labor Statistics' first report on the time of lost-workday injuries and illnesses for the 10 occupations with the most lost-time cases. Issued in December 2004, the report analyzed 2002 data from the BLS Survey of Occupational Injuries and Illnesses. This time analysis was possible because 2002 is the first year in which OSHA's recordkeeping rule changes made time of event, day of week, and number of hours worked prior to incident data available, BLS said.

The report's numbers are extremely interesting. Of the 1.1 million lost-workday cases in 2002 where data was available on the time of the incident, about half occurred right out of the chute, during the first four hours on the job. While cases were fairly evenly distributed on weekdays (more happened on Monday than on any other day for most of the 10 occupations, by the way), 12.8 percent of all cases occurred on Saturday and Sunday, a number I consider surprisingly high.

But look at the report's breakdown of median days away from work for recuperation according to hours worked before the injury or illness occurred. Across the board--from incidents before a shift even began, all the way up to almost 14 hours worked--median days away were 6 or 7. Then comes this spike:

Hours Worked

Number of Incidents

Percent of All Incidents

Median Days

14 hours to less than 15 hours

4,000

0.4 %

12

15 hours to less than 16 hours

4,700

0.4 %

11

16 hours to less than 17 hours

2,800

0.3 %

10

That is a snapshot of fatigue. While it caused a small fraction of total cases, they were the most severe in terms of costs to the employer and the injured worker. Both of the occupations where overnight or extended shifts are routine--1) truck drivers and 2) nursing aides, orderlies, and attendants--incurred 21 percent of their lost-time incidents between midnight and 8 a.m.

This column appears in the February 2005 issue of Occupational Health & Safety.

This article originally appeared in the February 2005 issue of Occupational Health & Safety.

About the Author

Jerry Laws is Editor of Occupational Health & Safety magazine, which is owned by 1105 Media Inc.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

Featured

Webinars