Articles


NHTSA Urges 15-Passenger Van Users to Check Tires

The NHTSA says tire safety is especially important for 15-passenger van users.

DOL and FAR Council Propose Guidance, Rule to Implement Fair Pay Order

A 60-day public comment period will follow publication.

Machine Guards May Have Prevented Arm Amputation

Griffin Lumber & Hardware received a willful violation from OSHA, which said the company ignored hazards.

OSHA and Health Canada plan to come up with a common label and SDS to help stakeholders comply with their Hazard Communication standards.

OSHA Working with Health Canada on GHS Alignment

The agencies plan to implement a system allowing the use of one label and one safety data sheet that would be acceptable in both countries.

OSHA Cites Contractor in Demolition Fatality

OSHA has cited Formica Construction Co. Inc. of Port Richmond, N.Y., for three willful, three serious, and one other-than-serious violation of OSHA standards with proposed fines of $121,000.

NSC Reports Traffic Deaths Have Increased for Six Consecutive Months

The trend is expected to continue as summer arrives.

Maryland State Police Made 9,500 Memorial Day Stops

Troopers' traffic enforcement efforts during the four-day Memorial Day weekend resulted in more than 9,500 vehicles stopped, with approximately 6,843 traffic citations and approximately 4,764 warnings issued.

Boeing forecasts global demand for commercial airline pilots to top 700,000 during the next 20 years. Airbus

FAA Announces Pilot Fitness Study

A joint FAA and industry group called the Commercial Aviation Safety Team recommended the study based on two recent major losses, the disappearance on March 8, 2014, of Malaysia Airlines Flight MH370 and the apparently deliberate crashing of Germanwings Flight 9525 in the French Alps by its co-pilot on March 24, 2015.



Firm Cited After Workers Endangered by Carbon Monoxide Gas: OSHA

OSHA has cited JRI Holdings Inc. for multiple violations.

Alfa Laval Faces $477,900 in Fines for Safety Violations

OSHA found 50 violations at the Broken Arrow, Okla., facility.

Amtrak announced May 26 it will install inward-looking cameras on the locomotives used on its Northeast Corridor trains, following the May 12 derailment near Philadelphia, its aftermath shown here.

Amtrak Installing In-Cab Cameras

Ten days after the Federal Railroad Administration ordered the company to take several actions to improve safety in the Northeast Corridor, Amtrak announced May 26 it will install inward-facing cameras in its Northeast Corridor locomotives.

NIST Establishing Forensics Excellence Center

The center will focus on improving the statistical foundation for fingerprint, firearm, toolmark, dental, and other pattern evidence analyses, and for computer, video, audio, and other digital evidence analyses.

Disregard of Fall Prevention Standards Leads to Death of Worker Who Fell Through Skylight

OSHA says proper protection could have avoided the "preventable" fatality.

FAA Adds New Modules to Safety Website

FAA Adds New Modules to Safety Website

Six new accident modules have been added. The library is available to the public and captures information learned from some of the world's most historically significant accidents.

NSC Presents Award for Collaborative Occupational Research

The Immigrant Dairy Worker Health and Safety project was developed by Migrant Clinicians Network, the National Farm Medicine Center, and five partners.

DOT Announces Steps to Address Takata Air Bag Defects

DOT Announces Steps to Address Takata Air Bag Defects

The National Highway Traffic Safety Administration will coordinate a remedy program.

OSHA Proposes Approval of State Plan to Protect Government Workers in Maine

The plan would protect the safety and health of state and local government workers.

Nanotechnology

NIOSH Launches Nano Health & Safety Consortium with SUNY Poly CNSE

The collaboration will address research for occupational safety and health in the nanotechnology industry.

NIOSH Collaborating with Wikipedia

The organization is helping to improve Wikimedia content using its own resources.

Examinetics, Inc., Announces Strategic Alliance with Occupational Health Dynamics

The alliance will implement the Online Respirator Clearance program.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence