Top Stories


Transport Canada to Look at De-Icing Recommendations

The Transportation Safety Board of Canada has recommended that the Department of Transport collaborate with air operators and airport authorities to identify locations in remote northern areas of the country where there is inadequate de-icing and anti-icing equipment and take urgent action to ensure the proper equipment is available.

OSHA Cites Florida Roofing Contractor for Repeated Fall Hazard Exposure

The company has been cited four times in the past five years for similar violations.

U.S. Fatal Work Injury Rate Dropped in 2017

Fatal falls were at their highest level in the 26-year history of the Census of Fatal Occupational Injuries (CFOI) and accounted for 887 workers' deaths. BLS also reported that fatal occupational injuries involving confined spaces rose 15 percent to 166 in 2017 from 144 in 2016.



Agency Warns Dental Patients of Infection Potential

"Even though the risk of infection from this situation is likely to be low, we don't know the exact risk for each patient at this clinic," said Dr. Jeff Duchin, Health Officer for Public Health – Seattle & King County. "Because infections can spread when good infection control practices are not followed, if you've been a patient at the George M. Davis Clinic, talk with your health care provider to help determine if you should get tested."

HELP Chairman Will Not Seek Re-Election in 2020

U.S. Senator Lamar Alexander will not seek re-election to the Senate in 2020, according to a statement he released Dec. 17.

Michigan Lowers Acceptable Blood Lead Levels for Workers

Michigan Lowers Acceptable Blood Lead Levels for Workers

Under the new MIOSHA rules, employees must be removed from lead exposure when their BLL reaches 30 μg/dL and cannot return to work involving lead exposure until their BLL falls below 15 (μg/dL).

NIOSH Develops Tools to Help Identify and Assess Areas of Dampness and Mold

Dampness can promote the growth of mold, bacteria, fungi, and insects. Workers and others in damp buildings can be exposed to airborne pollutants from biological contaminants and the breakdown of building materials.

OSHA Renews Charter of its Maritime Advisory Committee

MACOSH is made up of 15 representative members appointed by the secretary from multiple segments of the maritime industry (such as shipyard, commercial fishing, and longshoring) and representing multiple views and interests, such as management, safety and health professional organizations, and labor.

Oregon OSHA Pesticide Drift Regs Taking Effect Jan. 1

The rules expand a protective zone, extend the evacuation period, require storage for boots and shoes to prevent pesticides from being tracked into workers' housing, and require doors, windows, and air intakes to be closed when pesticides are applied.

Ho, Ho, How to Lower Retail Workers' Stress Levels

NIOSH recommends managers and employees work together to identify critical stress-related problems and design reasonable solutions to address them. And its online resources can help retail employers and workers alike.

NTSB to Unveil New Most Wanted List Jan. 9

NTSB also will host a Twitter Q&A during the event. To participate in the Twitter Q&A and to stay up to date with the Most Wanted List, follow the agency on Twitter at @NTSB and use the hashtag #ntsbmwl.

Toyota Issues Recalls of Almost 134,000 SUVs, Trucks

Toyota is conducting a safety recall involving certain 2018-2019 Model Year Tacomas, 2008-2019 Model Year Land Cruisers, and 2008-2019 Model Year Lexus LX 570 vehicles in the United States.

Transport Canada Setting New Flight and Duty Time Limits

Transport Canada is also introducing amendments to the Fit for Duty regulations that will prohibit any flight crew member to work when not fit for duty. This includes consumption of alcohol or drugs, mental and physical conditions, and fatigue.

Incentive Federation Plans to Develop Standards

The Incentive Federation, Inc. announced Dec. 12 that it is finalizing proposals to both ANSI to be approved as a developer of a Domestic Standards Program for Workforce Incentives, Rewards and Recognition Standards, and to ISO to have a Technical Committee established to oversee those standards and to eventually have them approved by ISO.

$66,000 Fine Issued in Fatal California Trench Collapse

On May 9, two Empire Equipment Services workers were installing sewer pipes at the site when a 30-foot-wide section of the trench's sidewall sloughed and collapsed. Only one of the workers was able to escape.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence