Top Stories


The purpose of additional weekly functional checks is to ensure the equipment is operating correctly and is capable of providing proper first aid in the event of an emergency. (Haws photo)

Testing Your Emergency Equipment to Meet ANSI Z358.1

Compliance is an all-day, every-day requirement.

If you work in an industry where silica dust is present, it

Three Dangerous Misconceptions Surrounding OSHA's Silica Dust Standard for General Industry

On June 23, most provisions of OSHA's silica standard for general industry became enforceable. Many employers still have a long way to go to achieve full compliance.

Transparency is an important part of the new Z359.18 standard.

A New Standard for Fall Protection Anchorage Connectors

ANSI Z359.18-2017 increases testing rigor—and it introduces field application testing, anchorage connector types, and labeling requirements.



Undertaking a walk-through survey using a hand-held, real-time sampler would give instantaneous indication of concentration. It also could be used to check the effectiveness of control measures. (Casella U.S. photo)

Combustible Dust Explosions: Are You at Risk?

Awareness training, good housekeeping, reference to safety data sheets, and adopting best practice should, in combination, minimize the potential for an explosion.

TOSHA Administrator: Every Employer Should Join VPP

There are 37 VPP sites in the state program, with two initial certifications under way this year and eight recertifications accomplished in 2017. "Frankly, it's something every employers should do," he said. "They could do that."

NTSB Sets Sept. 11 Meeting on Motorcycle Safety

While the safety board doesn't typically investigate motorcycle crashes, it conducted a motorcycle safety forum in 2006 and issued recommendations from that forum two years later. It has been more than 10 years since NTSB has issued new recommendations to help reduce motorcycle crashes and improve safety.

ASSP Foundation Accepting 2019 Scholarship, Grant Applications

"Our scholarship and grant program has helped hundreds of students and professionals advance their education and careers in a meaningful way," said ASSP Foundation Chair Linda M. Tapp, CSP. "Our donors have consistently supported the occupational safety and health profession by contributing awards that range from $500 to $15,000."

Safety+ Session Demonstrates Path to Employee Engagement

The exercise showed the presenters' point clearly: When managers allow employees to collaborate and strategize, they will find and use a successful solution. But putting pressure on employees to perform, with no input or collaboration allowed, is less likely to succeed.

PA Agencies Collaborate to Improve Highway Safety

PA Agencies Collaborate to Improve Highway Safety

With PennTIME, the agencies aim to reduce the time it takes to respond to and clear highway incidents and improve safety for first responders.

Survey Reveals Workplace Hand Washing Habits

Fifty-six percent of workers reported frequently or occasionally seeing work colleagues leave the restroom without washing their hands, according to Bradley Corporation’s annual Healthy Hand Washing Survey.

Labor Secretary Acosta Defends Compliance Assistance Approach

"Enforcement is critically important, but it will not solve every problem," he said at the VPPPA Safety+ symposium here at the Gaylord Opryland Convention Center.

VPPPA Members Backing Codification Bills

They're supporting two identical bills before Congress, HR 1444 and S 1878, to codify VPP nationally and make it permanent.

OSHA Official Gives Update on VPP Plans

Eliminating backlogged applications at some OSHA regional offices and instituting a national process for handling them are two goals the agency is working on.

Safety+ Symposium Setting Records

Safety+ Symposium Setting Records

The VPPPA annual national conference has more than 3,500 attendees and its largest exhibitor number ever, Director-at-Large J.A. Rodriguez, Jr. and other officials reported Aug. 28.

Cal/OSHA Cites Outdoor Ad Company

Cal/OSHA issued three citations to Outfront Media totaling $32,435 in proposed penalties. Since 2015, the state agency has opened 11 inspections of outdoor and display advertising employers.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence