Top Stories


This is an artist

Counting Down to NSC 2016

The pre-conference program identifies 10 technical sessions as "hot topics" for this year—and they look very promising.

Confirm that the instrument comes with Certificate of Calibration that is NIST traceable according to ISO/IEC 17025 testing criteria. Ensure that the instrument comes with a warranty and secure return policy. (Sper Scientific Environmental Measurement Instruments photo)

What Should You Know When Purchasing a WBGT Instrument?

In 2014 alone, 2,630 workers suffered from heat illness and 18 died, according to the U.S. Department of Labor.

When electricians are beginning to test and commission the building wiring system during the final phase of construction, only qualified persons should be involved with the turning on and off of electrical circuits.

Temporary Electrical Power, Keeping it Safe!

If planned properly, many components that will be a part of the permanent and final installation could be a part of the overall temporary power for the project.



Everyone is Out of the Building. Now What?

Be prepared to communicate. This is an element of response that is often overlooked and needs to be continually practiced.

Plumbed eyewash stations are permanently connected to a source of potable water, whereas portable stations are self-contained gravity-fed units with their own flushing fluid that must be replaced after each use. (Radians photo)

Understanding the ANSI Z358.1-2014 Standard for Plumbed and Portable Eyewash Stations

The ANSI Z358.1-2014 standard serves as a benchmark within the United States and also internationally to help protect workers from eye injuries from caustic and corrosive substances.

12 Items to Prevent Winter Weather Incidents and Illnesses (and You May Already Have Most of Them)

Allowing time for workers to acclimate to working in cold weather and limiting the length of outdoor shifts help prevent cold-related injuries. The right types of protective clothing are also essential.

FDA Requires Stronger Warning Labels on Opioids and Benzodiazepines

"It is nothing short of a public health crisis when you see a substantial increase of avoidable overdose and death related to two widely used drug classes being taken together," said FDA Commissioner Dr. Robert Califf, M.D. "We implore health care professionals to heed these new warnings and more carefully and thoroughly evaluate, on a patient-by-patient basis, whether the benefits of using opioids and benzodiazepines – or CNS depressants more generally – together outweigh these serious risks."

2015-2016 Construction Safety Highlights

From OSHA's National Safety Stand-Down to bridge collapse investigations and trenching hazards, the construction industry can learn from mistakes in order to boost its safety performance.

FAA Administrator Talks Safety at AirVenture

Michael Huerta discussed the importance of collaboration in Oshkosh, Wis.

Blue Bell Agrees to Follow Recognized Industry Standards

The standards to be followed are Sanitation Standard Operating Procedures (SSOPs); Good Manufacturing Practices (GMPs); a Pathogen Monitoring Program (PMP) for Lm that includes environmental, ingredient, and finished product testing; and a Hazard Analysis and Critical Control Points (HACCP) plan and/or a written Food Safety Plan.

Houston Contractor Violates Trench Requirements for Sixth Time in 10 Years

Oscar Renda Contracting faces $124K in OSHA penalties.

NBA Players Association to Pay Health Insurance for Retired Players

The program is the first of its kind among North American professional sports.

Red Cross Receives Grant for Community Fire Training in 15 States

ARC has received a $1.066 million AmeriCorps grant from the Corporation for National and Community Service to support AmeriCorps members to help the Red Cross teach children and adults in 15 states about home fire safety and being prepared for emergencies.

Adhesive Tape Manufacturer Exposed Workers to Electrical, Fire, Chemical Hazards

Scapa North America has been cited for 17 violations.

Seattle Marine Terminal Operator Fined $448,200

Seattle Bulk Shipping Inc. is currently appealing violations for which it was fined $424,850 and is considered a severe violator by L&I, meaning it is subject to follow-up inspections to determine whether the conditions still exist.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence