Top Stories


Paris Flooding Closes The Louvre

BBC News reported that the river had risen some 15 feet above its normal level, and that heavy rains across Europe have killed at least 10 people, most of them in Germany.

U.S., Canada Sign Food Safety Partnership

Caroline Smith DeWaal, the International Food Safety Policy Manager on the International Affairs Staff at FDA's Center for Food Safety and Applied Nutrition, reported it is only the second arrangement of this type; the first one was signed in December 2012 between FDA and New Zealand's food safety agency.

FDA Issues Guidance for Food Industry to Reduce Sodium

The agency has asked the food industry to reduce sodium in processed and commercially prepared food.



Real effort is needed to reduce your monthly disposal expenses and stem long range expenses from "down the crack." Using adequate spill containment is the key. (Trans Environmental Systems, Inc. photo)

Are Your Future Profits Going 'Down the Crack'?

Little "ooops!" add up to big future problems.

Alstom

OSHA Cites Railcar Manufacturer for Hazardous Exposures

The agency has issued 17 serious violations and $105,000 in penalties for exposures at Alstom's Hornell, N.Y., plant.

Agencies Working to Stop Spread of Colistin-Resistant Gene

CDC and HHS are involved. The Department of Defense notified stakeholders this week that its Multidrug-resistant Organism Repository and Surveillance Network at the Walter Reed Institute of Research had identified the first colistin-resistant mcr-1 E. coli in a person in the United States.

Workers Exposed to Chemical Hazards at Fragrance Manufacturer

OSHA has issued one repeat, six serious, and one other-than-serious violation.

Some are not aware that state-level Good Samaritan protections have advanced considerably over the years.

CPR and AEDs—Two Important Acronyms for Your Workplace First Aid Program

There are still scenarios where the AHA strictly recommends conventional CPR.

The final rule incorporates all or designated portions of several industry standards, including the American Petroleum Institute’s Standard 53, Blowout Prevention Equipment Systems for Drilling Wells, Fourth Edition.

Weighing BSEE's Well Control Rule

While Director Brian Salerno calls it "one of the most comprehensive offshore safety and environmental protection rules ever developed by the Department of the Interior," one industry group said the rule "could result in unintended negative consequences leading to reduced safety, less environmental protection, fewer American jobs, and decreased U.S. oil and natural gas production."

Vendors and health care employees are at risk when unfamiliar with techniques and procedures required to properly handle materials that can be supporting dangerous fungi and bacteria.

Three Steps to Minimize the Risk of HAIs in Your Facility

Despite CDC recommendations, there is no law requiring infection prevention training for any construction worker or other vendor working in a health care facility.

The Georgia World Congress Center hosts Safety 2016, the American Society of Safety Engineers

Dateline Atlanta

For those who attended the 2015 National Safety Council Congress & Expo nine months ago, the facility’s layout and downtown Atlanta are familiar territory.

When using PPE, whether it

Use PPE in the Workplace and Keep Your 'Eyes' on the Prize

Next is the concern that PPE is unattractive or doesn't fit properly. If employees are content with their appearance, they will be more likely to use PPE.

Whenever heat stress has escalated to heat exhaustion, medical services should be called and on-site cooling of the person should immediately begin. Heat stroke can occur suddenly, without any symptoms of heat exhaustion.

Understanding the Ramifications of Heat in Work Environments

Non-weather dependent hot work environments are created by the heat generated and/or contained within the environment, due to the task being performed, or both.

Today, a fleet of gas detectors can be managed more efficiently via an instrument management system, which may calibrate, charge, generate compliance reports, and more, automating the safety task and eliminating time-consuming, tedious paperwork for the busy safety engineer. (Honeywell Industrial Safety photo)

Selecting the Right Gas Detection Solution

Temperature, humidity, and pressure levels at the location all have a direct bearing on the type of equipment that should be selected.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars