Top Stories


Bus Company Withdraws Its Shutdown Order Appeal

The company illegally transported passengers to Philadelphia for the pope's visit, according to DOT.

BSEE Studies Arctic Response Challenges

The agency has tested a Geo-Referencing Identification Satellite tag project.

This final rule updates eye and face protection requirements in OSHA

OSHA Final Rule Updates Eye and Face Protection Standards

Employers are not required to update or replace protection devices solely because of this new rule and may continue to follow their current and usual practices for their eye and face protection.



New York State's Mandatory Electronic Prescribing Takes Effect

The new requirement, considered a key component of New York's I-STOP initiative to reduce misuse of prescription medications in the state, "will improve patient safety, reduce the number of fraudulent or stolen prescriptions, and help combat prescription drug abuse across New York," Gov. Andrew M. Cuomo said March 17 when he announced the effective date.

Alaska Volcano Erupts, Prompting Aviation Red Warning

The Pavlof Volcano is about 4.4 miles in diameter and has active vents on the north and east sides close to the summit. With more than 40 historic eruptions, it is one of the most consistently active volcanoes in the Aleutian chain, with ash plumes as high as 49,000 feet generated by past eruptions.

Union Pacific Sets New Systemwide Safety Record

The Omaha-based company reported it is the safest Class 1 railroad in the United States, based on its 2015 reportable injury rate.

Two ILO Safety and Health Conventions in Effect in Turkey

Each year, mining and construction rank among the most dangerous sectors in terms of occupational accidents and fatalities, both internationally and in Turkey.

Hundreds of thousands of Americans who receive a drone for Christmas 2015 should register them almost immediately, FAA announced Dec. 14, 2015.

FAA Expects Drone Sales to Triple By 2020

Commercial sales will rise from 600,000 in 2012 to 2.7 million by then, its annual Aerospace Forecast Report for 2016-2036 shows.

Cross-Border Truck Convoy Ready to Roll

The challenge is also backed by ACEA, the European Automobile Manufacturers Association, with hopes to accelerate the development of convoy-driving corridors in Europe and pave the way for EU legislative changes.

Roofing Contractor's Safety Failures Led to Worker's Death and Another's Severe Injuries: OSHA

OSHA has determined the incident was preventable. Proposed penalties total $63,900.

MSHA Chief Highlights Accomplishments and Challenges in Mine Safety

Assistant Secretary of Labor for Mine Safety and Health Joseph A. Main made remarks in Nashville at the National Stone, Sand and Gravel Association convention.

Lack of Training to Blame after Logger's Death: OSHA

According to BLS, 77 deaths in the forestry industry were recorded in 2014.

Tethered logging operations must be planned by the operator and the competent person on how to safely operate on slopes more than 50 percent, taking into consideration the experience of the operator; limitations of the machine and soil conditions; direction of travel; requirements for turning the machine on slopes; weather; load sizes; method and adequacy of anchorage; and any other adverse conditions.

Oregon OSHA Revises Guidelines for Tethered Logging

Employers intending to use winch- or cable-assisted systems for steep slope logging must ensure that the harvesting machine was specified by its manufacturer for operation on slopes of more than 40 or 50 percent or seek a research variance before using the harvesting machine above its slope limit with a tethered system.

OSHA Releases Silica Rule

OSHA has said the proposed rule "would bring protections into the 21st century" because it currently enforces 40-year-old permissible exposure limits for crystalline silica in general industry, construction, and shipyards.

Framing Company Exposes Workers to Dangerous Falls in Residential Community: OSHA

The work was being done at Santa Rosa Beach, Florida.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars