Top Stories


Reasonable suspicion drug testing is a critical safety measure.

Recreational Marijuana Now Legal in Oregon

The law allows Oregonians to have 8 ounces of useable marijuana at home and 1 ounce in public. Four marijuana plants are allowed per household

Workers Exposed to Amputation Hazards at Auto Parts Manufacturer

OSHA cited 11 serious violations for Cleveland Die & Manufacturing Company.

Metal Shop Exposes Workers to Machine Hazards

OSHA has proposed $54K in penalties.



NSC Says July the Deadliest Month for Preventable Deaths

Deaths from preventable incidents are 11 percent higher in July than the national average.

A personal fall arrest system should be designed and tested as a complete system because components from different manufacturers may not be interchangeable or compatible. (Miller Fall Protection by Honeywell photo)

The ABCs of Personal Fall Arrest Systems

All workers exposed to falls should be trained by a competent person to recognize fall hazards and to be familiar with available control methods and equipment.

Recessed and wall-mounted safety equipment is very appropriate in laboratory specifications. It’s both highly visible and completely out of the way.

Coordinating Guidelines and the ANSI Z358.1 Standard

While ADA has no specific guidelines for eyewashes or eye/face washes, it does outline other guidelines that can be helpful, such as maximum sink and/or counter height.

It is imperative to select only equipment that has been tested and approved to tie off at foot level or below.

Fall Protection for Iron Workers

It is imperative that you select only equipment that has been tested and approved to tie off at foot level or below.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

The Ripple Effect of Missed GHS Deadlines

How employers are experiencing the impact of the missed deadlines and what they can do to get on the right path toward full GHS compliance.

We can avoid having cosmetically enhanced pigs running about in the training department by remembering this scary truth about safety training: Trainees always learn something.

The Scary Thing About Safety Training

Safety training can make a substantive impact on employee morale when instructors take this approach.

Continuous atmospheric monitoring is always best practice. (MSA photo)

OSHA's New Confined Space Standard

It is generally agreed that this new standard was written to mirror many facets of its general industry counterpart.

We must remember to always wear our hard hats. If they are sitting at a desk, on a work bench, or in a truck, they are definitely not going to protect us.

Heads Up!

Just as important as actually wearing a hard hat when needed is making sure the hard hat fits properly. Hard hats must fit securely to provide maximum protection.

Teaching employees to handle and use each chemical safely does not require them to carry around volumes of manuals or countless handouts.

Three Hazmat Rules Every Employee Can Remember

Teach employees to get into the good habit of reading every label every time they pick up or pour from a container.

Perceived low-risk tasks typically involve the highest frequency of injury.

What Were You Thinking? The Key to Communicating More Effectively

The occurrence of experientially based at-risk behaviors driven by anticipated gains that outweigh any perceived costs is not limited to the highways or to drivers; it occurs all too often in the workplace.

Companies often send out an all-staff email if bad weather is predicted, but would employees really know what to do in a serious emergency, be it related to nature or man-made?

Plan, Prepare and Recover: How Businesses Can Manage Through Emergencies

Smaller companies often struggle, not knowing where to turn or having the budget to develop a robust business continuity plan.

Provide training in small "chunks" shortly before the time it

Adult Learning Principles for Safety Training

Your employees bring a lifetime of experiences to every training session. Sometimes they’ll know more than you do about specific hazards and safety conditions in their current jobs.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars