Top Stories


Fall hazards are a prime concern for workers who are on rooftops to remove snow, according to OSHA

OSHA Warns of Rooftop Snow Removal Hazards

Several recent incidents, including one fatality, involved workers who fell through skylights.

Beware of Fatigue, CHP Warns

"Fatigued drivers can be just as dangerous as an alcohol- or drug-impaired driver on our roadways," said CHP Commissioner Joe Farrow. "A lack of sleep will decrease a driver's awareness, slow reaction time, and impair judgment."

The aim of the audit is to assess FRA

Inspector General Auditing FRA's Railroad Bridge Safety Oversight

Complying with the Rail Safety Improvement Act of 2008, FRA issued a rule in 2010 that requires railroad track owners to implement bridge management programs and perform bridge inspections at least annually.



WHO: H5 Flu Viruses Most Obvious Health Threat

The agency posted an update titled "warning signals from the volatile world of influenza viruses." It said the world is better prepared for an influenza pandemic.

In hot environments, choosing garments with high THL performance is important for employees as well as management.

Maintaining Body Temperature in Extreme Conditions with FR Garments

By selecting FR garments with THL measures and layering in mind, safety managers can take steps to ensure employees will be able to maintain a safe and comfortable temperature in the workplace.

Two New MSHA Tools Added to Track Violations

Online improvements will help increase compliance with critical health and safety standards.

LOTO technology can create a safer workplace and make compliance more efficient.

Technology to the Rescue

LOTO technology can create a safer workplace and make compliance more efficient.

One of the most important things for a successful program is to get employees to feel like they are being included in the decision process of developing the hearing protection program.

Addressing Noise in the Workplace

One of the most important things for a successful program is to get employees to feel like they are being included in the decision process of developing the program.

Prevention of occupational head injuries starts by following the hierarchy of controls.

Preventing Occupational and Non-Occupational Head Injuries

Preventing occupational head injuries starts by following the hierarchy of controls.

The concept of control of hazardous energy focuses on the elimination or control of hazards and hazardous energy for maintenance and certain servicing operations.

Machinery Safety Survey Results: Safety Interlocks and Used Equipment

It is apparent that those responding generally knew that used industrial production equipment may not have all the safety whistles and bells.

The iconic yellow suit is only one component in providing complete safety for the wearer.

Hazmat Protection from Head to Toe

True hazmat gear must provide protection from head to toe.

Maintaining good ITM records allows you to compare current test data with historical data to track any deterioration in the equipment

Implementing a Fire Protection Inspection, Testing, & Maintenance Program for Water-Based Fire Protection Equipment

History has shown that some of the largest industrial fires have occurred when systems were out of service, or impaired.

As of Sept. 30, 2015 the Commercial Air Carrier Fatality Rate was 0.1 per 100 million passengers, meaning U.S. commercial air travelers enjoyed one of the safest years on record, according to DOT.

DOT's Lithium Battery Final Rule Takes Effect

Now, packages of any size that contain lithium batteries must be properly sealed and labeled, which could present a challenge to smaller businesses.

Photo 1. ISO 6530 test equipment with multiple layers of fabric clamped to "gutter." (Lakeland Industries photo)

Disposable Secondary FR Garments: What Really Matters When Selecting a Garment

Clearly, the addition of a flash fire or flame hazard to a scenario involving dry or liquid chemicals can significantly complicate protection.

Capitalizing on the advantages of HVLS fans requires careful analysis of each application, as well as each HVLS fan design. (Rite-Hite Fans photo)

Reducing Heat Stress with HVLS Fans

High-volume, low-speed fans help cool off employees and improve efficiency.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence