Top Stories


FAA Publishing Rule to Require Safety Management Systems

"Our commercial aviation industry is a world leader and model for risk mitigation, and I'm proud that so many airlines have embraced the SMS culture voluntarily. Now the FAA and the air carrier industry are taking the next step," FAA Administrator Michael P. Huerta said. "The FAA's workforce also is transitioning to a proactive, risk-based culture so we can effectively target our resources."

MSHA Says Coal Mining Deaths at Historic Low

The agency's preliminary fatality data for 2014 show 40 miners were killed in work-related accidents.

FAA Proposes $317,500 Civil Penalty Against United Air Lines

The penalty comes following an inspection that found an aircraft that was not in compliance.



Ice and snow buildup in parking lots and on walkways can be hazardous to employees, delivery people, and guests.

MIOSHA, Workers' Compensation Agency Join Forces for Winter Safety Campaign

"Every employer should have an effective safety and health management system in place to protect its most valuable asset: its employees," said MIOSHA Director Martha Yoder.

OnStar to Offer Driver Performance Feedback This Year: GM

"We are looking beyond traditional expectations of car makers and insurance providers, toward helping people be smarter drivers," said Dave Pratt, general manager of usage-based insurance at Progressive Insurance, which is involved in the new program.

Indonesia Suspends Aviation Officials, Requires New Briefings after AirAsia Crash

Pilots have disputed that the new regulations are necessary, however.

OSHA Cites Domestic Casting Again

Already added to OSHA's Severe Violator Enforcement Program, the company faces more than two dozen new violations.

2-1 OSHRC Decision Restores LOTO Serious Citation

An administrative law judge had ruled three years ago that OSHA failed to prove that Spirit AeroSystems, Inc., had violated the lockout/tagout general industry standard.

During the month of January, EPA wants to raise Radon hazard awareness among homeowners and business owners.

Eliminating Radioactive Gas in the Home and Workplace

During the month of January, EPA wants to raise radon awareness among homeowners and business owners.

ANSI Added 18 New Members in December 2014

The group includes New York City Transit, the Phoenix Police Crime Labs, and Jessup Manufacturing Co.

NTSB Issues Safety Alert on Railroad Signals' Visibility

The agency's 35th Safety Alert concerns light-emitting diode railroad signals' ability to mask nearby incandescent signals, preventing the incandescent signals from being visible to train crews, and it cites a $3.2 million September 2014 accident in Kansas as evidence of the problem.

Gerber Legendary Blades voluntarily recalled about 103,000 units of the Gator Combo Axe, which has a 7-inch knife in the hollow axe handle, in March 2011, the company and CPSC announced then.

Gerber Legendary Blades Paying Penalty for Late CPSC Reporting

The $2.6 million penalty involves the March 2011 recall of the Gator Combo Axe, a small hand ax with a 7-inch knife inside its handle.

New UN Mission Chief Takes Over

Ismail Ould Cheikh Ahmed arrived in Accra, Ghana, on Jan. 3 as the newly appointed Special Representative of the United Nations Secretary-General and begins work this week as head of the UN Mission for Ebola Emergency Response.

Lockout and tagout devices (locks and tags) must identify the name of the worker applying the device.

Ensuring Safety with a Lockout/Tagout Program: Seven Steps to Compliance

Procedures, devices, and personnel must be set in place to prevent a serious injury when a worker thinks a machine is safely off.

The NIOSH app was introduced last year. It includes selection and inspection tools and was developed by three researchers in the agency

Ten Feet Tall and Falling

Construction workers are used to contending with elevated risk levels, so they’re more likely to have a skewed perception of that risk.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence